Pulse Relay M1 compact 12 V
Product Options
Pulse relays compact find use when consumers are to be switched on or off for a defined time. Please specify the desired impulse time when ordering. Circuit diagram S1 and S2: operating voltage is applied to terminal 30. If the voltage is set at Terminal 15, the relay will immediately pull in for the specified time and then fall off again. The duration of the control signal has no effect on the output pulse duration (i.e. the relay is not retriggerable). Circuit diagram S3: Operating voltage is applied to terminal 87z. If the voltage is set at Terminal 15, the relay will immediately pull in for the specified time and then fall off again. Circuit diagram S2 and S3: The contacts are separate from the control and can therefore be used in links. In this variant, the relay contact is completely potential-free and thus capable of switching alternating voltage. Housing forms can be found in the section housing and basic body.
Product Options
Product Description
Product Details
5
Number of pins
2
In-/Outputs (total)
1
Inputs (total)
1
Inputs (digital)
1
Outputs (total)
1
Relay outputs
-40 to +85°C
Temperature range
8-16V
Operating voltage range
IP53
IP (Ingress Protection) rating
PA66GF30
Housing material
Realizer
Programming software
75mA
Current consumption
20A
Switching current
1mA
Quiescent current (12V)
100000
Switching cycles
30x30x30mm
Dimensions
5
Number of pins
2
In-/Outputs (total)
1
Inputs (total)
1
Inputs (digital)
1
Outputs (total)
1
Relay outputs
-40 to +85°C
Temperature range
8-16V
Operating voltage range
IP53
IP (Ingress Protection) rating
PA66GF30
Housing material
Number of pins
5
In-/Outputs (total)
2
Inputs (total)
1
Inputs (digital)
1
Outputs (total)
1
Relay outputs
1
Temperature range
-40 to +85°C
Operating voltage range
8-16V
IP (Ingress Protection) rating
IP53
Housing material
PA66GF30
Programming software
Realizer
Current consumption
75mA
Switching current
20A
Quiescent current (12V)
1mA
Switching cycles
100000
Dimensions
30x30x30mm
Accessories
Have An Inquiry?
"*" indicates required fields