Flasher M3 12 V

Product Options
The flasher unit start/stop M3 is used for signal and warning light applications. The flasher can be used in various vehicle types. The supply voltage is connected to terminal 30/87z. When an input voltage is applied to terminal 15 the flasher unit starts immediately, generating 90 +/-30 pulses per minute. The flasher output can switch loads up to 20 A. Higher loads may be switched with a second downstream power relay. The inverted input voltage is present on terminal 87a. Please refer to the chapter housing and base plates for additional housing options.
Product Options
Product Description
Product Details
5
Number of pins
2
In-/Outputs (total)
1
Inputs (total)
1
Inputs (digital)
1
Outputs (total)
1
Relay outputs
-40 to +85°C
Temperature range
9-16V
Operating voltage range
IP53
IP (Ingress Protection) rating
PA66GF30
Housing material
Realizer
Programming software
90 +/-30 pulses/min
Flashing frequency
2 ± 1 mA
Current consumption
NO 20A / NC 15A
Switching current
100000
Switching cycles
30x30x40mm
Dimensions
5
Number of pins
2
In-/Outputs (total)
1
Inputs (total)
1
Inputs (digital)
1
Outputs (total)
1
Relay outputs
-40 to +85°C
Temperature range
9-16V
Operating voltage range
IP53
IP (Ingress Protection) rating
PA66GF30
Housing material
Number of pins
5
In-/Outputs (total)
2
Inputs (total)
1
Inputs (digital)
1
Outputs (total)
1
Relay outputs
1
Temperature range
-40 to +85°C
Operating voltage range
9-16V
IP (Ingress Protection) rating
IP53
Housing material
PA66GF30
Programming software
Realizer
Flashing frequency
90 +/-30 pulses/min
Current consumption
2 ± 1 mA
Switching current
NO 20A / NC 15A
Switching cycles
100000
Dimensions
30x30x40mm
Accessories
Have An Inquiry?
"*" indicates required fields